General Labor/Stainless Finishing, 1st Shift
4.
0 Holland, MI Holland, MI Full-time Full-time $16 - $25 an hour $16 - $25 an hour NBE Open Position General Labor/Stainless Finisher, 1st Shift National Bulk Equipment (NBE) in Holland, Michigan, is rapidly growing and seeking a motivated and qualified individuals.
NBE designs, creates and builds custom bulk processing and reclamation equipment for customers around the globe.
The culture at NBE is exceptional, with strong leadership and a casual, inclusive atmosphere.
NBE is an expanding organization which offers opportunities for future career growth.
The company is also proud to offer employees an excellent, above-par benefits package.
NBE is a company to grow with! SUMMARY Grinds and smooths surfaces of items, prior to finishing operations by performing the following duties.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Examines and feels surface of workpiece for defects.
Selects grade of abrasive belt, wheel, or disk according to specifications, knowledge of abrasives, and condition of metal, and attaches to grinder.
Starts grinder and moves it over surface of workpiece to remove scratches, laminated metal, excess weld material, and burs.
Polishes ground areas with finer abrasive to produce smooth, unmarred surface.
Replaces worn abrasive disks, wheels, and belts.
Mix chemicals to correct ratios for the cleaning of welds and surface of the workpiece.
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
Ability to write routine reports and correspondence.
Ability to speak effectively before groups of customers or employees of organization.
MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
Ability to deal with problems involving a few concrete variables in standardized situations.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear.
The employee is occasionally required to climb or balance.
The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Job Type:
Full-time Pay:
$16.
00 - $25.
00 per hour
Benefits:
401(k) Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Tuition reimbursement Vision insurance Schedule:
Monday to Friday Weekends as needed Application Question(s):
Are you authorized to work in the United States? Work Location:
In person Examines and feels surface of workpiece for defects.
Selects grade of abrasive belt, wheel, or disk according to specifications, knowledge of abrasives, and condition of metal, and attaches to grinder.
Starts grinder and moves it over surface of workpiece to remove scratches, laminated metal, excess weld material, and burs.
Polishes ground areas with finer abrasive to produce smooth, unmarred surface.
Replaces worn abrasive disks, wheels, and belts.
Mix chemicals to correct ratios for the cleaning of welds and surface of the workpiece.
401(k) Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Tuition reimbursement Vision insurance Monday to Friday Weekends as needed Are you authorized to work in the United States?.
Estimated Salary: $20 to $28 per hour based on qualifications.
0 Holland, MI Holland, MI Full-time Full-time $16 - $25 an hour $16 - $25 an hour NBE Open Position General Labor/Stainless Finisher, 1st Shift National Bulk Equipment (NBE) in Holland, Michigan, is rapidly growing and seeking a motivated and qualified individuals.
NBE designs, creates and builds custom bulk processing and reclamation equipment for customers around the globe.
The culture at NBE is exceptional, with strong leadership and a casual, inclusive atmosphere.
NBE is an expanding organization which offers opportunities for future career growth.
The company is also proud to offer employees an excellent, above-par benefits package.
NBE is a company to grow with! SUMMARY Grinds and smooths surfaces of items, prior to finishing operations by performing the following duties.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following.
Other duties may be assigned.
Examines and feels surface of workpiece for defects.
Selects grade of abrasive belt, wheel, or disk according to specifications, knowledge of abrasives, and condition of metal, and attaches to grinder.
Starts grinder and moves it over surface of workpiece to remove scratches, laminated metal, excess weld material, and burs.
Polishes ground areas with finer abrasive to produce smooth, unmarred surface.
Replaces worn abrasive disks, wheels, and belts.
Mix chemicals to correct ratios for the cleaning of welds and surface of the workpiece.
QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
Ability to write routine reports and correspondence.
Ability to speak effectively before groups of customers or employees of organization.
MATHEMATICAL SKILLS Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
REASONING ABILITY Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
Ability to deal with problems involving a few concrete variables in standardized situations.
PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear.
The employee is occasionally required to climb or balance.
The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, depth perception, and ability to adjust focus.
WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Job Type:
Full-time Pay:
$16.
00 - $25.
00 per hour
Benefits:
401(k) Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Tuition reimbursement Vision insurance Schedule:
Monday to Friday Weekends as needed Application Question(s):
Are you authorized to work in the United States? Work Location:
In person Examines and feels surface of workpiece for defects.
Selects grade of abrasive belt, wheel, or disk according to specifications, knowledge of abrasives, and condition of metal, and attaches to grinder.
Starts grinder and moves it over surface of workpiece to remove scratches, laminated metal, excess weld material, and burs.
Polishes ground areas with finer abrasive to produce smooth, unmarred surface.
Replaces worn abrasive disks, wheels, and belts.
Mix chemicals to correct ratios for the cleaning of welds and surface of the workpiece.
401(k) Dental insurance Flexible spending account Health insurance Health savings account Life insurance Paid time off Tuition reimbursement Vision insurance Monday to Friday Weekends as needed Are you authorized to work in the United States?.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
